facebook twitter linkedin
Location:HOME > NEWS >

Notes for use of quick fluid connector

2020-09-27 14:26:30   
1. The fluid must flow from the sleeve side to the plug side.
2. Please use sealing material for external thread of control thread.
3. When installing the thread, please do not exceed the larger tightening torque to prevent damage.
4. Please do not use it for purposes other than quick fluid connections.
5. Do not use for fluids other than applicable fluids.
6. Please do not connect with the quick fluid connector made by other companies.
7. When using, do not exceed, higher use pressure limit.
8. Do not use outside the temperature range to prevent wear or leakage of sealing materials.
9. Do not hit, bend, stretch artificially to prevent damage.
10. Do not use it in places mixed with metal powder or sand dust to prevent poor work or leakage.
11. If the attached debris will cause bad work or leakage.
12. Please do not use it where gas is trapped.
13. Please do not load and unload when there is open fire nearby.
14. When tempering occurs, please replace with new ones.
15. When installing the hose, do not touch with oil to prevent natural fire.
16. When installing the hose again, cut the end of the hose from more than 3 cm.

previous_pageWhat are the common flange types?
next_pagePolishing process of stainless steel flange

Copyright:CANGZHOU KH FITTINGS CORP. Technical support:BOYIKEJI 冀ICP备17015867号-13








contact us
Email US

email us for a quick response...